Fending for yourself: Attaching fender skirts

Skirts-08

Before we could get a 3/8-inch six-point socket on the Timmerman nuts, we had to remove all the crud. A hooked dental pick did a good job of removing crud from the tiny rubber pad shown here, which is used at the base of the stud.

Before we could get a 3/8-inch six-point socket on the Timmerman nuts, we had to remove all the crud. A hooked dental pick did a good job of removing crud from the tiny rubber pad shown here, which is used at the base of the stud.

Bookmark the permalink.

Leave a Reply