Tag Archives: bumper

Bumper Bolt-Up: Challenger gets repro bumper

Sean Branson eyeballs the new mounting brackets to determine if the existing holes will work. “A lot of times you’ll have to hog out some holes and maybe do a little welding on the brackets,” he said. “We have an aftermarket bumper and aftermarket bracket, and a lot of times you’ll be just an 1/8 inch off and you’ll have to adjust the holes. This gives you a lot of adjustment left to right, but not as much up and down."

The rear bumper on this Dodge Challenger couldn’t be saved. But Fast Freddie’s Rod Shop in Eau Claire, Wis., had a solution. See step-by-step installation. More »

Categories: Restoration, Restoration Tips | Tags: , , , , , , , | Leave a comment

Fitting Fenders: Saved by shims

In the beginning, it was business as usual. With the car’s weight on its suspension and even tire inflation, a bottle jack was positioned under the sagging passenger’s side frame horn. Then a long level was laid across the shanks of the upper bumper studs.

What started out as a standard, straight-forward procedure in our ’31 Cadillac project took a surprising twist in the form of a twisted front fender. More »

Categories: Restoration, Restoration Tips | Tags: , , , , , , , , | Leave a comment