Cost Effective Ways To Remove a Dent From Your Car
Getting a dent in your car, whether it’s a brand new or an old one, is the worst experience ever. Your initial inclination may be to take it to a repair shop but be aware that the cost of fixing this may be several hundred dollars. Whether you drive a Jaguar or a Honda, with some time, effort and information, you might be able to remove that ding on your own. Try one (or all) of these do-it-yourself solutions before giving up on your car or spending a fortune having it repaired. These methods will allow you to fix your car whenever it is damaged by hail or other unexpected hazards.
EASY DIYs FOR REMOVING CAR DENTS
Plunger suction method
There is no doubt that this method is a super effective car dent remover. Use the plunger on your car the same way you would a sink. It’s effective for removing dents from doors and side panels by creating suction to pull the damaged area back into place. You will need to use a cup plunger instead of a flange plunger. Start by filling the plunger and dent with water; this will make the dent removal process easier. Don’t be too forceful, as the dent may need more suction than a plunger can provide.
The boiling water pliability method
Modern cars’ plastic bumpers are easier to dent-pop than their metal counterparts. To remove a dent from the plastic bumper of your automobile, pour some hot, boiling water over the dented area. The plastic should be pliable because it has been heated and is better able to release the dent.
Dry ice pop-out method
You can get rid of your car’s dents by wiping dry ice over them. Although handling dry ice requires hand protection using gloves, you may expect to see effects from this procedure quite rapidly. Dry ice should be applied to the dent directly. Apply the right pressure and see if the dent disappears on its own. Repeat the procedure until the dent is entirely removed, or try heating the surface with a hair dryer before applying the dry ice. The car’s plastic parts will be able to stretch and contract in response to the hair dryer’s heat and the dry ice’s cold. Either procedure will let you easily remove a dent from your car.
Compressed air expansion and hair dryer and contraction method
This approach employs a mixture of hot and cold air. As these two converge, they permit a dent to form on its own. The hair dryer causes the plastic in the dent to expand, and the cold compressed air causes the plastic to contract, effectively popping out the dent. Use the hair dryer to provide strong heat to the car’s damaged area.
Get it as hot as you can, and then blow on the dent with a can of compressed air. The plastic will shrink due to the cold air, allowing the dent to pop out naturally.
Rubber knockdown and long metal rod
When your car is dented, it results in some elevated and indented areas. You can reach the affected parts on either side of the dent with the help of a long metal rod and rubber or wooden hammer. To remove a dent, place the metal rod underneath it and the knockdown on top, then use the combined force of the two tools to push the dent out. This is a fantastic method for removing dents, and it can be all that’s required to fix any ding in your car.
THE BOTTOM LINE!
If you ever have a problem with a dent in your car, these do-it-yourself solutions will come in handy. Use a high-quality car cover to safeguard your car whenever it is not in use to help reduce the risk of damage to your car. Additionally, be careful when backing up close to other cars and objects, as this is typically where most car dents happen.